Tuesday, December 6, 2016

Rant - Gary "Weaponeer" Graham - Scammer

(09-Sept-2019) Update:  I thought this was over and done with - I don't give a shit about this clownshoe and there are better forums out there - but Weaponeer responded in my comments section calling this post a lie without any supporting evidence. I responded back and added two new links to bottom of post.  Weaponeer.net is dead for good and there is really nothing more that needs to be said.  I'ma just leave this post here.

So this guy Gary “Weaponeer” Graham of weaponeer.net has been sending out mass emails at the end of every month for the past year, soliciting donations for his website, which he claims is the "premiere home gunsmithing site."  On November 27, Weaponeer spammed his forum goers with eight of the same pathetic emails throughout the course of the day.  Is this fool serious?

Stop spamming me, asshole!
In his latest spam broadcast, he claims that he has made several “personal sacrifices” to keep the website up, such as eating a month’s worth of Ramen noodles in order to save money to keep the website running.  He also mentions he was hospitalized ten years ago due to frostbite on his foot because he coudn’t pay his gas bill one winter, implying he was busy paying hosting fees instead of keeping himself aliveOh how valiant of you, Gary - putting an online forum first over your own health.  You truely are an American Hero.  This spineless worm faked a medical claim to the VA so he could collect compensation and wouldn't have to work for the rest of his life and buy more worthless shit – of course he won’t mention that in his email.

November 27 letter.
There doesn’t seem to be any way to unsubscribe from his pathetic pleas for help, by the way.  Despite going to the forum, logging in and clicking “unsubscribe” from emails I still receive these emails.
No. Seriously.  Fuck off.

Why should I donate money to this forum when he can barely manage his own worthless self?  On top of that this guy has a history of e-begging and always he asks for large amounts of money at the very last minute.  It's absolutely pathetic.

Gary, you've given it over ten years and I have come to the conclusion that online forum managament is not for you  – so here is my donation to Weaponeer.net: some useful ideas!  Here’s how you can make money to support your website and forums and have some money left over to not die IRL:
  • Use the money that you stole from countless other customers that you ripped off because you never sent the goods.  How about use that money to support the website and not spend it on more fucking guns that you don’t need.
  • Better yet: Return the money to all the customers that you ripped off, possibly reconciling with the online gun forum community, thus getting a wider userbase.  Just maybe you can squeeze more dollars out of a wider audience.
  • Remove all the worthless forum bloatware that noone uses (user blogs and an arcade? What the fuck) to save bandwidth.
  • Consolidate the unnecessary 50+ subforums that nobody looks at to save more bandwidth.
  • Sell your fucking guns that you don’t need because apparently you need to pay utilities in order to not die.
  • Use that expensive machineshop of yours to create products we want and sell them on an online shop...
Shame on ME for not helping Gary
run his business for him!
Wait – what?  What do you mean you need $195 to open the online store?  Are you telling me I need to donate money for the “privilege” of buying something from your store?  Why would anyone want to donate money to someone just so you can re-open an online store and sell me stuff that may or may not be delivered?  Do you even understand the concept of running a business?

Or is it perhaps because private online storefronts don’t want anything to do with a known scammer.

"Premiere" my ass.  Weaponeer is not
Premiere anything.
I don’t even post on Weaponeer.net anymore just due to the sheer inactivity.  He gets two new posts on a dead day and maybe ten posts on a busy day.  That's 300 posts on a good month.  That should not cost $200 a month to operate. Hell, that shouldn't even cost $100 and if it does, that's easily be covered by a single person.  Gary is an obnoxious, arrogant jackass who has squandered countless opportunities to raise money for the website and instead resorts to constant e-begging.  CalGuns has a more streamlined forum with an active community and I ain’t even from California.

Gary Graham is a pathetic worm.  If he can’t take care of himself, maybe he should be sent to a home, courtesy of Uncle Sam.  Shit, I’ll donate money to that.  Using his status as a veteran to beg for money on the internet and shaming his followers because he can’t manage his own weak body’s health or his own forums is a bloody embarassment.  Gary is a disgrace to veterans everywhere.

I don't know what event's lead to Greg Clark's banning,
but Gary left some childish messages on his profile page AND reduced
his post count.
"Be sure to buy my complete series
on VHS today for the low price of $299!"
  • Weaponeer Horror Stories - Why Gary Graham is a scammer and should not be trusted with your money.
  • Weaponeer.net - Now defunct website in question.
  • CalGuns - Premiere gun discussion website that you should go to instead of weaponeer.
  • WeaponsGuild - I'm probably going to get banned for my scathing review on the Prexis sidefed, but I still recommend this place because ILU all.
  • Post by Weaponeer begging - He tries to scam google ad sense system and tells his sad story again.
  • Reddit post explaining Weaponeer.net being down - Quote: "That guy was & is a retard! Many people including myself have tried to help him out of his situation. He seems to be happier to let the site die then accept any help other then cold hard CASH."

Saturday, December 3, 2016

Ghetto as fuck .50 Cal spotted on AuctionArms

I don't know how I ever missed this, but there was a home-made, mounted, single shot rifle in .50 BMG on AuctionArms dated back to 2008 which sold for $351.  I never had an interest in owning a .50 BMG but at that price... I don't know.  I'd probably test fire it a couple times with surplus rounds using a string while hiding behind cover...  And then after that only shoot light reloads.

Wednesday, November 9, 2016

Videos - Reactions to Trump Victory

Today, Love Trumps Hate!  Bill Clinton's wife didn't get elected - and that is the most important thing.  There is also a better chance that the Hearing Protection Act will get more recognition and passed.  I feel like Christmas is here.

Monday, October 10, 2016

Video - Obama "If I had a son he would look like Trayvon"

Old clip, but I wanted to mess around in Corel VideoStudio x6 because I'm too ghetto to afford Sony Vegas or Adobe Premiere.

Sunday, August 28, 2016

Review - Prexis Sten ZK Side-fed Upper

I like the WeaponsGuild forums – they have a great community and the users there have a wealth of knowledge, but recently Mike “Jestism” Jestis banned Ian Mccollum from Fortgotten Weapons for giving an honest review on his own website.  I never followed up with my Prexis (aka Hellbox Armory) Sidefed AR15 (PSF15) upper that I was on a waiting list for over a year and because I thought he was an honest seller, and I’ve seen how he offered to make things right with some customers on the forums, and I felt like I already waited too long to complain after getting bogged with my own life of non-gun-related things, so I just let the whole thing go.

A day that will live in infamy.
Never forget.
Now that I know that Mike Jestis is truly a wanker on par with Gary Graham AKA “Weaponeer,” (or whatever the hell he’s calling himself now) I’m just going to go ahead and post my review of his so-called ZK Side Fed Upper (sometimes also referred to as the Prexis Sten Upper).  I’d rather not get banned from WeaponsGuild, but if he bans me for this, so be it.

Out of the box.
In 2009, I always wanted a pistol caliber carbine.  At the time, 7.62x25 ammo was cheap (1,100 round can for $90).  The Prexis Sidefed Upper (sometimes called the ZK Upper) product advertised that you could use cheap PPS-43 35 round magazines and did not need to change out the buffer assembly and magwell, unlike the traditional AR-9mm setup.  One would simply need to drop in the Prexis Sidefed Upper assembly and be ready to shoot.

Quick mock-up, before final fitting.
I received the Prexis Side Fed upper kit back in September 2010 after waiting nearly fourteen months.  I ordered the kit version because it was cheaper than the assembled version, but I knew that it was going to require work, which was just fine with me.  I was not impressed when I opened the package.  The upper receiver appeared to be made of a thick DOM steel tubing, the takedown pin attachment points were attached via ugly-looking blob welds, and I think the finish was some kind of spray paint.  The machining of the components looked good, though – I’ll give him that - but that does me no good when they don’t even safely function.

Stripped upper.
It was a kit gun, which meant some assembly was required - I knew that.  I’m not completely incompetant - I can build functioning AKs and AR15s and scratch-build my own receivers and finish guns that headspace properly and don’t fire out of battery.  But the kit seemed simple:  Attach magwell via two 8-32 screws, fit and finalize headspace by pressing in barrel and pinning it in place as you would an AK47, and finally attach the provided scope-rail.

Short-chambered barrel will cause
case-head separations.
After headspacing and pinning the barrel, I took it to my range for a few rounds of test firing.  The three rounds I shot gave me mangled brass.  Upon close inspection of the barrel with a round, I could see that there was too much case head exposed.  According to the headspace gauge it should have passed, but I guess I overlooked that.  I even asked Jestism if these barrels were fully chambered before I purchased this and he assured me they were.

Blown-out primer AND
a case-head separation.

I ended up milling off about ~0.22” from the rear of the barrel and reamed the chamber further through with a 7.62x25 tokarev reamer, so that was one reason I never bothered Jestism about fixing it, because I already fixed it my damn self.  I had already took matters into my own hands and made major modifications that I felt voided any refund or response, plus it was quicker than having to wait around to get my barrel fixed.

Blown primer.

Second, look at this shit.  I didn’t really think anything much of it at first, because I’ve seen boltfaces that had huge firing pin holes before that fired fine.  The firing pin hole is large enough that the firing pin can puncture the primers and the case can backfire and shoot debris through the hole at the shooter.  The surplus ammo was worse and brass would shred through the firing pin hole, binding the firing pin.  This could potentially cause a slam-fire.  This gun is not safe to shoot without completely rebuilding the bolt and re-chambering the barrel.

Scant, out-dated two-page instruction.
Note the PPS-43 magazine.
Oh yeah, Jestism forgot to mention that the finished product no longer takes PPS-43 magazines, as was advertised on every single one of his pictures, posts, and website.  About a week after I received mine – I found out that the reason my weapon wasn’t feeding at all was because now it takes modified PPSH-41 magazines.  Thanks for not mentioning that, whatsoever! It wasn’t mentioned in the 2-page instruction print-out that came with the upper (which literally said "USE PPS-43 Magazines"), not via e-mail, not on the official product website, not in a post-it note, and not on the official product thread.  I spent hours pouring over every thread related to this product to find a one-sentence reply from Jestism, which was buried in a 40+ page thread, that my PPS-43 magazines won’t work.
So basically magazines for this gun don’t even exist.  You have to make them by first removing the steel jacket that’s spot welded onto the PPSh-41 magazine and cut the magazine release slot with dremel and file.
Another magwell close-up.

So I ordered a couple of PPSh-41 magazines.  I don’t particularly like them since they’re single feed, which means they’re harder to load, plus they require modification, which makes them worthless for everygun that uses them except this “Sidefed Upper.”  I don’t like modifying magazines and I hate proprietary magazines.  A magazine should work right out of the box.

Magwell mod.
After finally getting a single magazine done, I find that the magazine has a worse fit than the PPS-43 magazine for some reason.  Which makes sense, since this gun was designed, originally, to run on PPS-43 magazines but for some last-minute reason does not.  It wobbles back and forth and my solution for this was to install a 8-32 screw in the inside rear of the magwell so it could take slack from the wobble motion of the magazine.

It fed about 85% of the time, which is 85 more than 0, so that was good, I guess.   So after fixing the broken barrel, and the magazine feed issue, that still left me with a worthless bolt which I now have to fix myself or re-create from the ground up.

It was at that point I gave up.  I ended up buying parts for a 9mm AR and was satisfied with that.  I was, at the time, pretty busy and I don’t spend all damn day in my garage building guns and shit, if you can believe that.  I spend about an hour or two a month at most.  By the time I got to where the gun fed from the magazine and had proper headspace, a year had gone by and I figured it just wasn’t worth my time or his.  I have some ideas how I can fabricate my own bolt from other bolts that use common parts and share similar bolt body diameter.  That way I don’t have to worry if this hacksmith will charge me to replace my extractor down the line or blacklist me for not taking part in his circle jerk forum posts.

I’m still going to use weaponsguild, because like I said, the people there are friendly, helpful and knowledgable even if the owner is a two-faced bastard, and it’s a different place than TheHighRoad.org or AR15.com.  I will definitely be avoiding any Prexis/Hell Box Armory products in the future.  Here's some random pictures.

PPS-43 magazine and chamber.
The package.
It was wrapped really, really, nicely.

Close-up of the magwell.
The root cause of blown-out primers.

The bolt.

"Mike, I can't believe I fucking died for this!"

This would be cool if it functioned,
but it doesn't.
Links, Resources, etc.

Thursday, June 16, 2016

RE: Orlando Shooter; Alligator eats child

Two conflicting quotes on the Orlando shooter and proposed laws:
"He was born in Queens, N.Y. just like Donald was himself. Muslim bans and immigration reforms would not have stopped him, they would not have saved a single life in Orlando." - Hillary Clinton
 From California:
...But lawmakers are adamant that every little step toward preventing the next mass shooting is worth a vote. "If it could've helped, if it would've made it more probable that it could've been prevented, less likely that it would've happened, that's a good thing. That's what we should be moving forward,” Rob Bonta.
RE: Alligator Eats Child news story, or "False Reality of Goofy Emotions Surround Baby-Eating Alligator Situation." Yes it's from The Daily Stormer - but Andrew Anglin is so well-spoken, intelligent, and just an overall likeable fellow.
If you’re American, you’ve probably seen some of the news reporting. It’s overshadowing the gay bar massacre. What is shocking to me is that they are all saying “we’re hoping for the best” – as if maybe the child is still alive somehow, hours after having been dragged to the bottom of a lake in the jaws of an alligator.
This is ridiculous. The baby would have probably been crushed to death almost immediately by the alligator’s jaws, it certainly wouldn’t survive long underwater and it definitely wouldn’t survive being chewed up and eaten.

Watching this coverage was really demonstrative of the childlike nature of modern Western society, where people are afraid to face any reality that makes them feel bad, and will instead collectively endorse and embrace blatantly false realities that make them feel better.
-Andrew Anglin
 From the always-hilarious Daily Stormer comments section:
Clearly the alligator in question was a "lone wolf". This was just another incident of work-place violence with no overtones of Islamic terrorism.  The alligator's ex-wife has been contacted and she believes the alligator may have been gay.

Sunday, May 8, 2016

Video - Happy Mother's Day!

Video I took of a hawk feeding it's younglin' in the wild in New York state last year.

Friday, January 29, 2016

Video - The REAL Chris Kitaeff - False Flag FFL

This guy's name keeps floating around as if he's the Brady Campaign's long-awaited messiah or some shit, so I'm bringing this up again.  I'm hesitant to call this "False Flag" due to the association with tinfoil wingjobs, but that's what this is.  Basically just a video of what I wrote back in August.

Thread Exposing Chris Kitaeff
Another Article Exposing Chris Kitaeff
CEO Barry Laws Cuck Sellout
Random News Article about Chris
Another pointless news article
Rep. Rob. Kelly's PR on Chris Kitaeff

Bill Brown - Return to Castle Wolfenstein Soundtrack
Ivor Slaney - Window Gazing

See Also: My writeup on Chris Kitaeff  - Basically more of the same stuff